Description
Dear Friend,
welcome to Our store. We are a sight manufacturing factory in China. If you want to purchase sight in bulk and get more factory information, please contact online customer service. You will get an unexpected purchase price .
Have a nice day!!!
2.0 MOA round aiming dot
Magnification: 1x
Battery Type: One(1) CR2032
Battery Life: Up to two years
Shock, dust, impact, fog and recoil resistant
Material: Aircraft Grade Anodized Aluminu
Height: 1.46"
Length: 1.77"
Width: 1.18"
Weight:2.30 oz
Illumination Settings:12x
Adjustment Range:±40 MOA
Adjustment Graduation: 1 MOA
1) The system shall have two buttons for the purposes of controlling reticle intensity. Each button shall allow the user to jog
between 12 levels of intensity.
The " +" button will increase the intensity, one level per press up to the maximum level. Once the maximum level of intensity
is reached, subsequent presses shall not change the intensity to the minimum setting.
The "-" button will decrease the intensity, one level per press to the minimum level. Once the minimum level of intensity is
reached, subsequent presses shall not change the intensity to the maximum setting.
2) With initial battery installation, the reticle intensity shall be at level 6 brightness.
3) After inactivity for a period of approximately 2 minutes, the system will become auto off. The power will be up to the
previously used reticle intensity when you go into action.
4) Either press "+" or "-"button for over 3 seconds will power the system off, and turn off the power awake function.
WINDAGE AND ELEVATION ADJUSTMENTS:
The red dot is fully adjustable for both windage and elevation. The adjustment screws are located on the top and right side of
the sight body. Make the necessary adjustments if necessary.
NOTE: Adjustments to both the windage and elevation knobs reference your Point of Impact (POI).
Should your impacts be below your point of aim, dial UP to reach zero. If the POI(Point of Impact) of the test group is
exactly in the center of the target then the POI is POA (Point of Aim) and the sight is zeroed. If the POI is not POA, further
adjustments need to be made. Follow the POI directions found near each adjustment screw and make the necessary
adjustments accordingly to achieve POI is POA and the sight is zeroed.
MAINTENANCE:
1. Maintain the metal surface of the reflex sight by removing any dirt or sand with a soft
brush so as to avoid scratching the finish.
2.Wipe the lens with a cleaning cloth to keep it clean and dry. In order to avoid scratching
the glass, ensure both the lens and cloth are clean. Do not use finger or finger nail to
touch/clean lens.
3. Store the reflex sight in a cool dry place when not in use. Be careful to avoid contact
with acid, alkaline or corrosive chemicals.Remove batteries from the reflex sight if storing
for a prolonged period of time.
4. Do not attempt to lubricate any part of the reflex sight.
5. Do not disassemble the sight. Any such or similar actions will void the warranty.
CAUTION:Viewing the sun can cause serious eye injury. Never look directly into
the sun with this or any optics.
Con la garantía de:
